Deep Well Pumping Cylinders are designed for use with large windmills and for deeper pumping wells. The plunger assembly in the deep well cylinder has 4 leather cups to give added seal to the plunger inside the cylinder bore. The added cup leather makes a better seal against water pushing past when lifting a heavier column of water from deeper depths. Dean Bennett Supply can help you with all your windmill and hand pump needs, as well as electric pumps and accessories. Call us at 800-621-4291 for help with your well situation.
 
852 Deep well cylinder for pumping water with large windmills and pump jacks.

Fiberglass Pumping Rod for Windmill pumping systems.
Fiberglass Pumping Rod
for Well Cylinders

Galvanized Steel Pumping Rod for windmill and hand pump wells.
Galvanized Steel Pumping Rod
for Hand Pump and Windmill
stroke wells

 

711 soft cup leathers for well cylinders swell up to seal inside the cylinder barrel.
711 Soft Cylinder Cup

706 hard cup leathers for well cylinders are usually used in deeper set wells
706 Hard Leather Cups

707 graphited cup leathers for well cylinders are impregnated with graphite. This aids lubrication of the cylinder cups in the well cylinder.
707 Graphite Coated
Leather Cups

Neoprene rubber cylinder cup.
Neoprene Cylinder Cup

 

All Brass Deep Well Windmill Cylinder Pumps are designed for deep wells and large windmills. The All Brass #852B cylinder pumps are stroke pumps that are operated with rod connected to a windmill or pump jack. These Deep Set Cylinder Pumps are ideal for Jensen Pump Jacks and for Windmills 12' size and larger. The deep set pump cylinder comes with a 4 leather ball check plunger assembly, and a single leather ball bottom check valve. The 4 leather plunger assembly gives a better seal for lifting water from a deeper depth. Dean Bennett Supply stocks all the items you need for your windmill or pump jack well. Call us at 800-621-4291 to place an order, or get the information you need.

Aermotor windmills pump water with wind power. Dean Bennett Supply has served the windmill customer since 1965.

Aermotor windmills pump water with wind power. Dean Bennett Supply has served the windmill customer since 1965. Call 800-621-4291 today to get help with your windmill, hand pump, pumping cylinder and other windmill system accessories.
 

DEEP WELL WINDMILL
CYLINDERS
& Sinker Bars
 

DEAN BENNETT SUPPLY
Toll Free   1-800-621-4291
Smart Phone Dialable

# 852-B    ALL BRASS   OPEN TOP   DEEP WELL WINDMILL CYLINDERS 
for DEEP WELLS or LARGE WINDMILLS

Windmill Catalog Page 61a
 

The #852-B Deep Well Cylinder is heavy duty and designed for your deepest well settings. The
#852-B is an all brass open top working barrel for deep sets. These open top windmill cylinders come with a 4-leather ball valve plunger assembly and a ball valve bottom check valve. The plungers are tapped in the bottom so that they can be screwed onto the top of the bottom check to retrieve it from the cylinder bottom, without having to remove the pipe from the well. We stock these deep well windmill cylinders in 48" long barrel length, with up to 36" of stroke area, which allows for using up to 2 settings on each cylinder. After the first area of stroke in the cylinder becomes worn, you can adjust the rod length to make use of the unused portion of the cylinder stroke area. These cylinders are female iron pipe thread on top, to attach the cylinder to your drop pipe.

If you are using a 12' or larger windmill, or are setting the cylinder more than 325' to 350' into the well, the #852B Deep Well Open Top Cylinder is what you need. These are also great for use with Jensen pump jacks which have a longer stroke. The heavy duty construction allows this cylinder group to withstand the rigorous workout a large windmill gives it with all its power. The Jensen pump jack has a long stroke that creates excessive jerk on your rod, and this cylinder is designed to take the extra strain.
 

4 leather plunger assembly for deep set well cylinders.
ALL BRASS OPEN TOP DEEP WELL PUMPING CYLINDERS
 
$ 447.00
852B178
1-7/8" x 36" Stroke x 48" Overall Length made with 2" All Brass Cylinder with 2" female iron pipe threads &  5/8" Rod.  Has a 1-7/8" 4-leather Ball Valve Plunger and Ball Valve Bottom Check. Weight  26 lbs.
 
$ 569.00
852B214
 
2-1/4" x 36" Stroke x 48" Overall Length made with 2-1/2" All Brass Cylinder with 2-1/2" female iron pipe threads, requiring a 7/8" Rod. Cylinder has a 2-1/4" 4-leather Ball Valve Plunger and Ball Valve Bottom Check.
Weight  36 lbs.
 
$ 757.00
852B234
 
2-3/4" x 32" Stroke x 48" Overall Length made with 3" All Brass Cylinder with 3" female iron pipe threads, &  7/8" Rod. Has a 2-3/4" 4-leather Ball Valve Plunger and Ball Valve Bottom Check. Weight  55 lbs.
 
#852B REPLACEMENT PLUNGERS AND BOTTOM CHECK VALVES

Download pdf page 62
 

141.00 1-7/8"  4-leather Ball Valve Plunger Assembly
$   84.00 1-7/8"  Ball Valve Bottom Check Valve
 
$ 174.00 2-1/4"  4-leather Ball Valve Plunger Assembly
112.00 2-1/4"  Ball Valve Bottom Check Valve
 
$ 261.00 2-3/4"  4-leather Ball Valve Plunger Assembly
$ 181.00 2-3/4"  Ball Valve Bottom Check Valve
 

GALVANIZED & BRASS COUPLINGS

These Deep Well Cylinders made from heavy duty brass have female iron pipe threads on the top. The cylinder does not require couplings to connect the windmill cylinder to the galvanized steel pipe. We offer Pipe Couplings in Galvanized and Brass for your well requirements.
 

Pipe Coupling
Size
 
Galvanized
Coupling
Brass
Coupling
1" $   1.70 $   9.25
1-1/4" $   2.05 11.25
2" $   4.40 $ 19.75
2-1/2" $ 12.20  
3" $ 14.90  
4" $ 20.25  
     

1-3/16"  COLD STEEL SINKER BARS
TO ENHANCE CYLINDER PERFORMANCE

Windmill Catalog Page 61a

Sinker Bars are used with strings of sucker rod that are not rigid or that are lighter than 43 lbs per 100 foot of rod. These sinker bars when connected to the working plunger assembly in the cylinder, may increase pumping capacity by up to 30% by keeping tension on the string of rod and helping insure the full stroke of the cylinder. A sinker bar that has been precision machined will also help to insure the proper alignment of the working plunger in the cylinder, thus increasing the efficiency and expected life of the cylinder. We recommend one sinker bar on all open top working barrel cylinder installations. On shallow installations, multiple sinker bars should be installed to make 50 to 75 pounds of weight connected to the plunger between the sinker bars and the well sucker rod. These 1045 cold steel sinker bars are 31" long and weigh 10 lbs each.

Sinker bar used to transition from one size thread to another and to add weight in the well for the rod performance.

$ 79.95 #370570 31" SINKER BAR  
Threaded  5/8" male x  5/8" female rod thread
 
$ 79.95 #370575 31" SINKER BAR
Threaded  7/8" male x  5/8" female rod thread
 
$ 79.95 #370580 31" SINKER BAR
Threaded  5/8" male x  7/8" female rod thread
 
$ 79.95 #370585 31" SINKER BAR
Threaded  7/8" male x  7/8" female rod thread
 

CYLINDERS     CYLINDER REPAIRS     HOME     HAND PUMPS      PUMP JACKS

Price effective July 15, 2013

Download our catalog in pdf format