Aermotor windmills pump water with wind power. Dean Bennett Supply has served the windmill customer since 1965. Call 800-621-4291 today to get help with your windmill, hand pump, pumping cylinder and other windmill system accessories.

Baker 11 HD hand pumps are the industry standard.
Baker Hand Pumps

Open top working barrel cylinder for pumping water with a windmill.
Windmill Pumping Cylinders

Cistern pump like grandma had on her counter in the kitchen.
Counter Top Cistern Pumps

Aermotor Windmills are water pumping windmills that are powered by the wind.
Aermotor Windmills

Fiberglass Pumping Rod for Windmill pumping systems.
Fiberglass Pumping Rod
for Well Cylinders

Galvanized Steel Pumping Rod for windmill and hand pump wells.
Galvanized Steel Pumping Rod
for Hand Pump and Windmill
stroke wells

Flush cap cylinder for pumping water with a windmill or hand pump.
Windmill & Handpump
Cylinder Pumps

Aermotor windmills pump water with wind power. Dean Bennett Supply has served the windmill customer since 1965.

CYLINDER CUP LEATHERS

DEAN BENNETT SUPPLY
Toll Free   1-800-621-4291
Smart Phone Dialable
 
LEATHER  CUPS for
PUMPING
CYLINDERS


#711 SOFT LEATHER CYLINDER CUPS

Windmill Catalog Page 63

#711  Waterproof cup leathers are soft and pliable, and are best suited for use in windmill cylinders. These cup leathers are made from the finest grade of leather for minimum water absorption and maximum service life.

711 soft cup leathers for well cylinders swell up to seal inside the cylinder barrel.

Leather
Size
Full
Dozen
Cost Each


Description with Center Hole Size

Less Than
Dozen
Cost Each
1-1/8" $   3.25 #711 Leather Cups with 5/8" center hole $   4.05
1-3/8" $   3.60 #711 Leather Cups with 7/8" center hole $   4.50
1-11/16" $   3.65 #711 Leather Cups with 1" center hole $   4.60
1-3/4" $   3.65 #711 Leather Cups with 1-1/8" center hole $   4.60
1-13/16" $   3.65 #711 Leather Cups with 1-3/16" center hole $   4.60
1-7/8" $   3.65 #711 Leather Cups with 1-1/4" center hole $   4.60
1-15/16" $   4.50 #711 Leather Cups with 1-5/16" center hole $   5.65
2" $   4.50 #711 Leather Cups with 1-5/16" center hole $   5.65
2-1/4" $   4.90 #711 Leather Cups with 1-3/8" center hole $   6.15
2-1/2" $   5.20 #711 Leather Cups with 1-5/8" center hole $   6.50
2-3/4" $   5.70 #711 Leather Cups with 1-7/8" center hole $   7.15
3" $   6.75 #711 Leather Cups with 2" center hole $   8.45
3-1/2" $   8.00 #711 Leather Cups with 2-1/2" center hole $ 10.00
3-3/4" $ 10.05 #711 Leather Cups with 2-5/8" center hole 12.55
4"
 
12.10 #711 Leather Cups with 3" center hole $ 15.15

#706  HARD LEATHER CYLINDER CUPS

706 hard cup leathers for well cylinders are usually used in deeper set wells

Windmill Catalog Page 63a

#706 Hard cup leathers are hard, hair side out, high polished finish cylinder leathers used in deep well cylinders. #706 cup leathers may come either black or brown.
 

Leather
Size
Full
Dozen
Cost Each


Description with Center Hole Size

Less Than
Dozen
Cost Each
1-7/8" $   3.85 #706 Leather Cups with 1-1/4" center hole $   4.80
2" $   4.75 #706 Leather Cups with 1-5/16" center hole $   5.95
2-1/4" $   5.15 #706 Leather Cups with 1-3/8" center hole $   6.45
2-1/2" $   5.50 #706 Leather Cups with 1-5/8" center hole $   6.90
2-3/4" $   6.25 #706 Leather Cups with 1-7/8" center hole $   7.80
3"
 
$   7.15 #706 Leather Cups with 2" center hole $   8.95

#707  GRAPHITE COATED LEATHER CYLINDER CUPS

707 graphited cup leathers for well cylinders are impregnated with graphite. This aids lubrication of the cylinder cups in the well cylinder.

Windmill Catalog Page 63a

#707  Graphite coated leathers are made from the center of the hide, flesh side out. The graphite coating prevents fast absorption of water and acts as a lubricant to reduce binding of the plunger in the cylinder.

Leather
Size
Full
Dozen
Cost Each


Description with Center Hole Size

Less Than
Dozen
Cost Each
1-7/8" $   3.85 #707 Leather Cups with 1-1/4" center hole $   4.80
2" $   4.75 #707 Leather Cups with 1-5/16" center hole $   5.95
2-1/4" $   5.15 #707 Leather Cups with 1-3/8" center hole $   6.45
2-1/2" $   5.50 #707 Leather Cups with 1-5/8" center hole $   6.90
2-3/4" $   6.25 #707 Leather Cups with 1-7/8" center hole $   7.80
3"
 
$   7.15 #707 Leather Cups with 2" center hole $   8.95

NEOPRENE / RUBBER CYLINDER CUPS

Windmill Catalog Page 63

Neoprene rubber cylinder pumping cups for water pumping cylinders. Neoprene does not swell up, so they seal better in the cylinder, immediately.


The Towner neoprene rubber cup has been used for years in Australia with outstanding success, showing 3 to 4 times the working life of standard leather cups. The neoprene rubber cup with fabric reinforcement will work well in either new or worn cylinders.
 

Neoprene
Cup Size
Price
Each

Description with Center Hole Size

1-7/8" 10.50 Neoprene Cylinder Cups with 1-1/4" center hole
2" 11.00 Neoprene Cylinder Cups with 1-5/16" center hole
2-1/4" 11.85 Neoprene Cylinder Cups with 1-1/2" center hole
2-1/2" 12.30 Neoprene Cylinder Cups with 1-5/8" center hole
2-3/4" 13.75 Neoprene Cylinder Cups with 1-7/8" center hole
3"
 
$ 17.40 Neoprene Cylinder Cups with 2" center hole

LOWER VALVE LEATHERS and PACKING RINGS

Windmill Catalog Page 63

Bottom flapper check leather. Designed for use in Cast iron cylinders that have a weighted flapper in the bottom.

LOWER VALVE LEATHERS

These Lower Valve Leathers and Leather Packing Rings / Cap Gaskets are used in some styles of cast iron brass lined cylinders as well as in pitcher pumps. The first number in the description is the OD of the leather and the second number is the ID or cylinder size. 
 

Price Each Cylinder Size           Lower Valve Leather Description
$   4.30 2" 2-1/2" OD x  2" ID  Lower Valve Leather
$   4.75 2-1/4" 2-3/4" OD x  2-1/4" ID  Lower Valve Leather
$   5.20 2-1/2" 3" OD x  2-3/8" ID  Lower Valve Leather
$   5.95
 
3" 3-1/2" OD x  3" ID  Lower Valve Leather
LEATHER PACKING RING / CAP GASKETS
$   2.30 2" 2-1/2" OD x  2" ID Packing Ring / Cap Gasket
$   2.75 2-1/4" 2-3/4" OD x  2-1/4" ID Packing Ring / Cap Gasket
$   3.25 2-1/2" 3" OD x  2-1/2" ID Packing Ring / Cap Gasket
$   4.30
 
3" 3-1/2" OD x  3" ID Packing Ring / Cap Gasket

SPECIAL SOLID CENTER CUP LEATHERS
Solid center cup leathers are provided for your cylinder where you need a special hole size.

Windmill Catalog Page 63a

The following Solid Center ( NO CENTER HOLE ) Leather Cups are stocked in Denver. New leathers will measure smaller than their size implies. This is because they will swell in the water up to the proper size. Order leathers based on the ID ( inside measurement ) of the cylinder bore, not the measurement of an old leather. * If not in stock - Sold in full dozen amount only.
 

Leather
Size
Cost
Each
  Leather
Size
Cost
Each
  Leather
Size
Cost
Each
1/2" $   4.30   5/8" $   4.30   3/4" $   4.35
7/8" $   4.35   1" $   4.40   1-1/8" $   4.75
1-1/4" $   4.75   1-5/16" $   5.30   1-3/8" $   5.30
1-1/2" $   5.30   1-5/8" $   5.30   1-3/4" $   5.35
1-13/16" $   5.35   1-7/8" $   5.35   1-15/16" $   6.60
2" $   6.65   2-1/4" $   7.20   2-1/2" $   7.65
2-3/4" $   8.35   3" $   9.95   3-1/4" $ 11.75
3-3/4" $ 14.80
 
  4" $ 17.85      
YOU CAN COMBINE LEATHER CUPS WITH OTHER ITEMS IN OUR CATALOG
TO QUALIFY FOR OUR  $ 1,000.00  FULL FREIGHT PREPAID ORDER POLICY

HOME

Download our catalog in pdf format

Prices effective October 1, 2011