|
|
3/4" Brass Insert Coupling | 7IBCOUP | $ 5.10 |
| 1" Brass Insert Coupling | 10IBCOUP | $ 8.05 | |
| 1-1/4" Brass Insert Coupling | 12IBCOUP | $ 12.15 |
INSERT by IRON PIPE
THREAD
BRASS FITTINGS
Download Brass Insert Fittings in pdf
When you use poly pipe to set a pump or run a water line, the ends of the pipe need to be converted to iron pipe thread, so you can connect them to other fittings. We offer many of these fittings in brass, since it is corrosion resistant.
BRASS INSERT COUPLINGS
Barb x Barb for connecting 2 pieces of pipe
|
|
3/4" Brass Insert Coupling | 7IBCOUP | $ 5.10 |
| 1" Brass Insert Coupling | 10IBCOUP | $ 8.05 | |
| 1-1/4" Brass Insert Coupling | 12IBCOUP | $ 12.15 |
BRASS EXTRA LONG INSERT
COUPLINGS
Barb x Barb - 12 barbs for extra holding
power
|
|
|||
| 1" Brass Extra Long Insert Coupling | 10IXLBCOUP | $ 11.00 | |
| 1-1/4" Brass Extra Long Insert Coupling | 12IXLBCOUP | $ 17.75 | |
| 2" Brass Extra Long Insert Coupling | 20IXLBCOUP | $ 31.50 |
BRASS ROPE EYE MALE ADAPTERS
Barb x Male Thread with a Rope Eye
 |
The brass rope eye male adapter screws into the top of your submersible pump and inserts into poly pipe. The eye provided on the side is for safety rope to prevent losing your pump in the bottom of the well, if the insert fitting should come out of the poly pipe. |
||
|
1" Barb x 1" Male Iron Pipe Thread Brass Rope Eye Adapter with an eye for attaching a safety rope. |
BRA4 | $ 9.40 | |
|
|
BRA54 |
$ 10.95 |
|
|
|
BRA5 |
$ 11.95 |
|
BRASS INSERT MALE ADAPTERS
| Barb x Male Pipe Thread brass fitting is used to add threaded ends to poly pipe. These are normally used where the pipe is laying flat and there is no downward pull, such as there would be if you was hanging a pump. | |||
|
|
3/4" Brass Barb x 3/4" Male Iron Pipe Thread |
7IBMA | $ 4.80 |
|
1" Brass Barb x 1" Male Iron Pipe Thread |
10IBMA | $ 8.10 | |
|
1-1/4" Brass Barb x 1-1/4" Male Iron Pipe Thread |
12IBMA | $ 10.35 | |
|
2" Brass Barb x 2" Male Iron Pipe Thread |
20IBMA | $ 19.95 | |
EXTRA LONG BRASS INSERT MALE
ADAPTERS
Barb x Male Thread - 12 Barbs for extra
holding power
|
|
|||
|
1" Brass Extra Long Barb x 1" Male Iron Pipe Thread |
10IXLBMA | $ 10.35 | |
|
1-1/4" Brass Extra Long Barb x 1-1/4" Male Iron Pipe Thread |
12IXLBMA | $ 14.40 | |
|
2" Brass Extra Long Barb x 2" Male Iron Pipe Thread |
20IXLBMA | $ 25.05 |
BRASS INSERT
FEMALE ADAPTERS
Barb x Female Iron Pipe Thread
| 1" Brass Barb x 1" Female Iron Pipe Thread |
10IBFA |
$ 9.30 |
|
| 1-1/4" Brass Barb x 1-1/4" Female Iron Pipe Thread |
12IBFA |
$ 11.35 |
SPECIAL BRASS INSERT HYDRANT FITTINGS
|
|
These special brass insert fittings are used to make connection between poly pipe and bury hydrants. They have a barb end for inserting into the poly pipe and a male pipe thread for connection into the hydrant. | ||
| 3/4" Barb
x 3/4" Male Iron Pipe Thread Brass Insert Hydrant Elbow. |
7IBHL | $ 7.85 | |
|
|
1" Barb x
3/4" Male Iron Pipe Thread Brass Insert Hydrant Elbow |
10X7IBHL | $ 9.20 |
| 1" Barb x
1" Barb x 3/4" Male Iron Pipe Thread Brass Insert Hydrant Tee |
10IBHT | $ 12.10 | |
BRASS HOSE ADAPTERS
Hose thread x pipe thread
 |
3/4" Male Hose Thread x 3/4" Male Pipe Thread | H4 | $ 2.95 |
| 3/4" Male Hose Thread x 1/2" Male Pipe Thread | H5 | $ 2.95 | |
| 3/4" Male Hose Thread x 3/4" Male Hose Thread | H8 | $ 2.95 | |
| 3/4" Male Hose Thread x 1" Female Pipe Thread | H11 | $ 4.40 | |
| 3/4" Female Hose Thread x Combination 3/4" Male and 1/2" Female Pipe Thread | H7 | $ 3.25 | |
| 3/4" Female Hose Thread x 1/2" Female Pipe Thread - Swivel Type | S1 | $ 3.70 | |
| 3/4" Female Hose Thread x 3/4" Female Pipe Thread - Swivel Type | S2 | $ 3.70 | |
| 3/4" Female Hose Thread x 3/4" Female Hose Thread - Swivel Type | S3 | $ 3.70 |
ALL STAINLESS STEEL WORM GEAR CLAMPS
Download Stainless Steel Hose Clamps in pdf
| Type H-SS Series clamps have 1/2" wide stainless steel bands and stainless steel 5/16" slotted hex head shoulder screws. The high corrosion resistance of the all stainless steel band housing, and screw makes it the preferred clamp for all plastic poly pipe installations. | |||
| H12SS | $ .80 | Use for 1/2" or 3/4" poly pipe | 11/16" thru 1-1/4" |
| H16SS | $ .81 | Use for 1" poly pipe | 3/4" thru 1-1/2" |
| H20SS | $ .83 | Use for 1-1/4" poly pipe | 13/16" thru 1-3/4" |
| H32SS | $ .85 | Use for 1-1/2" and 2" poly pipe | 1-9/16" thru 2-1/2" |
| H40SS | $ 1.35 | Use for up to 3" OD pipe | 2-1/16" thru 3" |
| H56SS | $ 1.55 | Use for up to 4" OD pipe | 3-1/16" thru 4" |
| H72SS | $ 1.80 | Use for up to 5" OD pipe | 4-1/16" thru 5" |
| H96SS | $ 2.75 | Use for up to 6-1/2" OD pipe | 5-9/16" thru 6-1/2" |
| H99SS | $ 2.95 | Use for up to 7" OD pipe | 6-13/16" thru 7" |
| MM4SS | $ .85 | Use for up to 5/8" OD small tubing | |
| MM5SS | $ .85 | Use for up to 29/32" OD tubing | |
DEAN BENNETT SUPPLY COMPANY
800-621-4291
Download our catalog in pdf format
Prices effective October 15, 2008
