Flint and Walling water well pump company offers
pumps for pumping water from the surface of the well. Many people have wells
that have water near the surface, and the jet pump will allow them to
pressurize a water well pressure tank for home use. Normally, a shallow well
jet pump can suck water
up from about 15' using a shallow well ejector
the front of the pump. This bolt on ejector package contains a nozzle and
venturi, which allows the jet pump to re-circulate some water into the
ejector to create a suction that pulls water from the well through an 1-1/4"
pipe. Using a foot valve on
the bottom of the 1-1/4" pipe going into the
well, allows the water to stay in the pipe, making the suction process
easier on the pump.
People that have a
deeper well, and a static water level below where a shallow well jet pump can
suck from, can use a deep well ejector to pump water. The deep well ejector
goes into the well with an 1-1/4" and a 1" pipe. The pump diverts some water
back down the well through the 1" pipe to lift water to the pump on the
surface, through the 1-1/4" pipe, where the 2 pipes are connected to the face of the pump. Depending
on which venturi and nozzle used, water can be pumped from deeper well
depths, than a shallow well pump could pump from.
Follow the Jet Pump Chart links to the performance chart for your model
DEAN BENNETT SUPPLY CO.
Smart Phone Dialable
Please call us at 1-800-621-4291 for assistance in selecting the proper pump
for your well. It takes only a few minutes, and you will get a pump that is
designed to give you the best performance for your well conditions,
as well as a great price.
F&W JET PUMPS QUALIFY TOWARD OUR $ 1000.00
FULL FREIGHT PREPAID ORDER POLICY
AND CAN BE COMBINED WITH TANKS, WIRE AND
ANYTHING BUT PIPE FOR PREPAID FREIGHT
Flint and Walling pump company makes
jet pumps that are used to pump water from a shallow well with a shallow
well ejector, or from a deep well with a deep well 2 pipe ejector down in
the well. Shallow well jet pumps are suction pumps that suck water from
the water source down to approximately 25' deep, however in most parts of
the country, the deepest you can suck water from is 20' to 21' deep. After
20' depth, your jet pump should have a deep well ejector package installed
onto it, using 2 pipes going from the pump down to the ejector package in
the well. A deep well regulator is used to divert some water back down the
well through the smaller 1" pipe, to lift water through the larger 1-1/4"
pipe. The ejector package has a nozzle and a venturi installed. that is
what jets the water to lift from deeper depths. Dean Bennett Supply helps
do it yourselfers select the proper pump and equipment to pump water from
a well for house or farm use. Call us at 800-621-4291 for help with
selecting a new Flint and Walling jet pump for your well. We also have
deep well packers that will lift water from a 2 inch well.
Warranty: Dean Bennett Supply covers your Flint and Walling jet pump for 1 full
year from date of purchase, against failure.
For Zoeller sump and sewage pumps visit
For Aermotor windmills and livestock water www.aermotorwindmills.com
F&W Pump Index
DEAN BENNETT SUPPLY Home Page
January 6, 2014
our catalog in pdf format