Pipe Setting Tools for setting submersible water well pumps in a well. The Ranchers Pipe Holder is designed for galvanized steel pipe only. The Ranchers Pipe Holder is ideal for setting or pulling a windmill cylinder pump. The Ranchers Pipe Holder has a 2000 lbs. non shock test load, so be sure not to overload it.
When setting a pump on PVC drop pipe, we recommend the use of the Pipe Setting Clamp pipe holder which has finer grips in the biting jaws to hold better on PVC pipe without allowing the PVC pipe to squeeze and slip, or become damaged. The Pipe Setting Clamp will hold up to 3500 lbs of non shock load.
We offer elevators for controlling lifting and lowering pipe into a well. Economy pipe elevators are metal hinged units that go around the pipe and let the coupling ride on top of it. Chain is used as the lifting connection. We also offer a vise grip designed for holding poly pipe when lowering a pump into a well.

Flint and Walling Water Well Submersible Pumps, Centrifugal and Self Priming Sprinkler Pumps, Jet Pumps and Water System Accessories
Flint and Walling Water Well Submersible Pumps, Centrifugal and Self Priming Sprinkler Pumps, Jet Pumps and Water System Accessories are all available from Dean Bennett Supply where we welcome the Do-it-yourself installer. Call 1-800-621-4291 to select your well supplies.
 

Open top working barrel cylinder for pumping water with a windmill.
Windmill Pumping Cylinder

like the type you would
use a 8871 Ranchers Pipe Holder to set.

Submersible pumps for rural home water wells and livestock water wells.
Submersible Pump

Like the Pipe Setting Clamp
Pipe Holder is used on.

Threaded Flush Joint PVC Monitoring Pipe for Environmental Monitoring Wells.
Threaded Flush Joint PVC
Monitoring Pipe
like you would use the
Pipe Setting Clamp 2 on

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PVC Drop Pipe for Setting Submersible Water Well Pumps.
PVC Schedule 80
Drop Pipe
used to set
Submersible Pumps
is used with the Economy
Drop Pipe Elevators
and Pipe Setting Clamp

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Coiled poly pipe for setting water well pumps in wells.
1" and 1-1/4" Poly Pipe
for setting submersible pumps.

PIPE
HANDLING
TOOLS
 

DEAN BENNETT SUPPLY CO
Ph 1-800-621-4291
Smart Phone Dialable

#8871 RANCHER'S PIPE HOLDER

Download Pipe Holder in pdf

Rancher's Pipe Holder is for use with Galvanized Steel Pipe.

#8871 Rancher's Pipe Holder
is an economical way to hold pipe while lifting or lowering a pump in a well. It will handle galvanized steel pipe 1", 1 1/4", 1 1/2", and 2" in size. The Rancher Pipe Holder is not designed for PVC pipe since it can squeeze the pipe and loose the grip on the pipe. This is a great tool for setting or pulling up a windmill cylinder.
 
$ 199.00 The non-shock load limit is rated at 2000 lbs. The catch has a corrugated or concave face which reduces the possibility of pipe slippage. The pipe holder is mounted on a heavy 2" thick wood base plank.
 

PIPE SETTING CLAMP PIPE HOLDER

Download Pipe Setting Clamp in pdf
 

Pipe Setting Clamp          
$ 429.00

Pipe Setting Clamp has a replaceable serrated jaw of tempered steel - pipe size and tension adjuster is a 7/8" acme threaded rod located inside of the front jaw. Unit will hold 1" thru 2" pipe at any point along the pipe. Handles galvanized and Sch 80 PVC equally well, and is tested at up to 3500 lbs. Single hand operation with a safety lock pin to prevent accidental opening or release.

The pipe setting clamp is used for PVC or steel pipe to hold it while installing or pulling out a pump.

Pipe Setting Clamp 2 for 2" thru 4"

PIPESETTINGCLAMP2 for Pipe Sizes 2-1/2", 3", and 4"
$ 825.00
 

The all new heavy duty Pipe Setting Clamp 2 is the drillers answer to holding the larger pipe sizes from 2-1/2" up through 4". Pipe Setting Clamp 2 is basically an enlarged version of the popular Pipe Setting Clamp which is designed for pipe up through 2" in size, with many of the same features. The tool has been used world wide by environmental drillers, pump installers, well servicemen, and water well drillers. The main body is constructed of 2" and 2-1/2" steel tube with 1/4" wall thickness. Easy to operate, over center locking of jaws when downward pressure is applied to the 19" long lever handle. 1/2" safety pin is used to prevent accidental unclamping. Pipe Setting Clamp 2 allows workers to bring pipe or drill joint up to an easy working level because it bites anywhere on the side of the pipe. The tool weighs 30 lbs. and it is 20" long and 7-1/2" wide. The jaws are equipped with 16 carbide tipped grippers for excellent holding capability with load tests done over 7000 lbs. The Pipe Setting Clamp 2 is designed to hold PVC, HDPE, Stainless Steel, and Galvanized Steel pipe in 2-1/2", 3" and 4" pipe sizes.
 
The Pipe Setting Clamp 2 is made for 2-1/2" thru 4" pipe.
 
Pipe Setting Clamp2 offers you the extra gripping power to hold any type of pipe from the side of the pipe to prevent it from slipping. larger grip teeth bite the larger pipe to hold securely.

PIPE SETTING CLAMP 3 for 6" PVC

$ 860.00

PIPE SETTING CLAMP 3 Pipe Holder is for holding 6" PVC Pipe. Pipe Setting Clamp 3 has 20 carbide tipped grippers which are 3/8" 16x1/2 and is load tested for 7000 lbs.
Unit is 20" long and 7-1/2" wide and weighs 37 lbs.
Pipe Setting Clamp 3 is a SPECIAL ORDER item.
 

$ 325.00

PIPE SETTING CLAMP 3 ADD ON for optional 5" casing inserts consist of jaw pads and bolts to use the PIPE SETTING CLAMP 3 for 5" casing. Buy Pipe Setting Clamp 3 and the 5" jaw pads.
 
New #681NT Pipe Dog Pipe Lifting Tool is now back in stock. # 681NT Rancher's Pipe Dog Pipe Lifter

JUST BACK IN STOCK

$ 279.00   681NT

Download Pipe Lifter in pdf

# 681NT Rancher's Pipe Dog Pipe Lifter is an inexpensive pipe lifting and setting tool. The heavy duty serrated eccentric wheel will handle 3/4" thru 2" pipe without slippage. This pipe clevis is designed for light weight service only, and has a steel cable for lifting.
IT IS NOT RATED OR TESTED - DO NOT OVER MATCH IT.

ECONOMICALLY PRICED DROP PIPE ELEVATORS

Download Drop Pipe Elevators in pdf

 

NEED AN AFFORDABLE DROP PIPE ELEVATOR
TO USE TO SET YOUR PUMP SYSTEM?

These elevators for 1 inch and 1 1/4 inch drop pipe are designed just like the units used by well drillers to handle PVC casing. Close the elevator around the drop pipe, insert the pin, and lift the pipe supported by the coupling on the end. Chain is 1/4" and tested 1250 lbs. These are excellent for setting a pump on PVC drop pipe.
 

Economy drop pipe elevators for lowering pipe into a well.
1/2" Chain Type Drop Pipe Elevator * $ 228.00 pair
3/4" Chain Type Drop Pipe Elevator * $ 232.00 pair
1" Chain Type Drop Pipe Elevator $ 214.00 pair
1-1/4" Chain Type Drop Pipe Elevator $ 220.00 pair
1-1/2" Chain Type Drop Pipe Elevator $ 226.00 pair
* 1/2" and 3/4" Drop Pipe Elevators are SPECIAL ORDER
 
 

BAIL TYPE STEEL PIPE ELEVATORS

Download Steel Pipe Elevators in pdf

These bail type steel pipe elevators are designed for the well driller and pump installer. Normally used in pairs, however you can use only one elevator if a pipe holder is also used during installation. All steel fabricated construction allows these heavy duty pipe elevators to handle up to 10,000 lbs.
 

  DENVER STOCK BAIL TYPE ELEVATOR SIZES
PRICES ARE EACH
The bail type pipe elevator can be used on steel and PVC pipe with couplings. $   425.00 1" Elevator
$   455.00 1 1/4" Elevator
$   505.00 1 1/2" Elevator
$   545.00 2" Elevator
$   595.00 2 1/2" Elevator
$   640.00 3" Elevator
$   735.00 4" Elevator
SPECIAL ORDER ELEVATOR SIZES ( EACH )
$   405.00 1/2" Elevator
$   410.00 3/4" Elevator
$   685.00 3-1/2" ( 4" OD )
$   870.00 4-1/2" ( 5" OD )
$   970.00 5" Elevator
$   975.00 6" Elevator
$ 1110.00 7" Elevator
1290.00 8" Elevator
$ 1545.00 10" Elevator
$ 2025.00 12" Elevator
$ 2690.00 14" Elevator
$ 3325.00 16" Elevator


PVC PLASTIC PIPE ELEVATORS

Download PVC Casing Elevators in pdf

These light weight PVC plastic pipe and casing elevators will work on either belled end pipe or pipe with couplings. Elevators are constructed of formed and welded 1/4" steel with a hinged opening. Zinc plated proof coil chains are included with these elevators. The 2" thru 6" elevators use 1/4" chain and are rated 1250 lbs test. Elevators 8" and larger use 5/16" chain and are rated 1750 lbs test.
 

PRICE as pair DENVER STOCK PVC ELEVATOR SIZES PVC casing elevators are used to lower PVC casing into a well while casing the well.
$ 220.00 Pair 2" Elevator for 2 3/8" OD
$ 249.00 Pair 4" Elevator for 4 1/2" OD
$ 254.00 Pair 4 1/2" Elevator for 5" OD
$ 259.00 Pair 5" Elevator for 5 9/16" OD
$ 275.00 Pair 6" Elevator for 6 5/8" OD
 
  SPECIAL ORDER ELEVATOR SIZES PVC casing elevators offer a secure holding ability for PVC casing.
$ 226.00 Pair 3" Elevator for 3 1/2" OD
$ 340.00 Pair 8" Elevator for 8 5/8" OD
$ 594.00 Pair 10" Elevator for 10 3/4" OD
$ 599.00 Pair 12" Elevator for 12 3/4" OD
$ 815.00 Pair 14" Elevator for 14" OD
$ 825.00 Pair 16" Elevator for 16" OD

#26JS FLUSH JOINT PVC CASING CLAMP $ 995.00

Download PVC Flush Joint Casing Clamp in pdf
 

 
Flush joint casing does not have couplings, so the flush joint casing pipe holder is used to securely hold flush joint pipe. A lifting plug is also used to do the lowering. #26JS Flush Joint PVC Casing Clamp is a unique pipe holder that will handle all styles of 2" thru 6" plastic pipe. Although especially designed for flush OD pipe ( smooth OD with no outside coupling ), it will work equally well on normal belled end or coupled plastic pipe.No special inserts are needed. It is quick acting, as just one turn of the screw assembly locks the pipe in place. Large opening in base accommodates up to 6" couplings. Clamp has a strong aluminum base plate. Field proven and tested to over 4000 lbs, this pipe holder is excellent for monitoring holes or water well applications. This casing clamp is a Denver stock item.
 
 

#122JS FLUSH JOINT PVC CASING CLAMP   $   447.00

The #122JS Flush Joint PVC Casing Clamp will handle all styles of 1/2" thru 2" plastic pipe
( accommodates a 2" coupling ) and is available on a special order basis from the factory.

#810JS FLUSH JOINT PVC CASING CLAMP   $ 1490.00

The #810JS Flush Joint PVC Casing Clamp will handle all styles of 8" thru 10" plastic pipe
( accommodates a 10" coupling ), and is available on a special order basis from the factory.
 

INTERNAL PVC PIPE CUTTERS

Download Internal PVC Casing Cutters in pdf
 

This internal PVC pipe cutter tool allows you to make accurate, square cuts at floor level or in other blind locations. Easily preset for depth of cut, they slide inside the pipe and make their cuts in seconds. User must supply power source
( 1/2" capacity, 350 - 450 rpm drill, rated at 4.6 to 6 amps is recommended ).
 

PVC casing cutter cuts off the casing at a level below ground by cutting from the inside.
$   80.75 2" Sch 40 Internal PVC Cutter has a cutting range of 1 5/8" to 8 1/4" from the top of your
2" Sch 40 PVC or ABS pipe.
 
$   27.25 #1293  Replacement cutter for 2" internal PVC cutter.
 
111.75 4" Sch 40 Internal PVC Cutter has a cutting range of 1 5/8" to 11 5/8" from the top of your 4" Sch 40 PVC or ABS pipe.
 
$   37.00 #4293  Replacement cutter for 4" internal PVC cutter.
 
$ 197.75 6" Sch 40 Internal PVC Cutter has a cutting range of 1-5/8" to 11-5/8" from the top of your 6" Sch 40 PVC or ABS pipe
 
$   37.00 Use #4293 cutter blade for the 6" internal PVC cutter,
the same one as used in the 4" internal PVC cutter.
 
$ 206.00 6' Long Drive Shaft for use with 1-1/2" and 2" internal PVC cutters. #700777
$ 279.00 6' Long Drive Shaft for use with 3", 4" and 6" internal PVC cutters. #700778
 
$   95.00 3" Sch 80 Internal PVC Cutter has a cutting range of 1-5/8" to 11-5/8" from the top of your 3" Sch 80 PVC or ABS pipe.
 
$   29.50 #3293 Replacement cutter for 3" Sch 80 internal PVC cutter.
     

PIPE HOG REAMERS FOR PVC / ABS PLASTIC PIPE
Pipe Hogs are used to ream out PVC pipe fittings that need repaired.
The reamer cleans out the inside so that a new piece of pipe can be inserted and glued.
 

$   94.25 2" Pipe Hog Reamer for 2" Sch 40
PVC pipe fittings.
 
#16200 PVC Pipe Hog Reamers are for hogging out the PVC glued into a fitting to make repair.

Using the hog reamer to hog out the glued in pipe from a coupling.
$ 113.75 4" Pipe Hog Reamer for 4" Sch 40
PVC pipe fittings.
 
#16400
$   22.75 Reamer Guide for 2" Sch 80 PVC used with #16200 2" Reamer
 
#700589
$   29.75 Reamer Guide for 4" Sch 80 PVC used with #16400 4" Reamer
 
#700591
Download Pipe Hog Reamers on PDF Page 87
       
DROP PIPE VISE GRIP FOR POLY PIPE  
DPVGPP   $   97.00
DPVG114  $ 107.00
Download Poly Pipe Vise Grips in pdf
 
Drop Pipe Vise Grip for Poly Pipe is a handy and inexpensive pipe holder for either 1" or 1 1/4" polyethylene coiled plastic pipe. Similar to normal vise grips or channel locks, the serrated split coupling grips the smooth walled poly pipe during installation or removal. This tool has a non-shock load limit of 1000 lbs.

#DPVGPP is for 1" poly pipe
#DPVG114 is for 1-1/4" poly pipe
 

Poly Pipe Vise Grip tool for holding poly pipe while installing or pulling from well.Vise grip tool helps hold poly pipe when installing a pump in a well.
HOME

Download our catalog in pdf format

Prices effective April 7, 2014