PRESSURE TANK
FITTINGS KITS

Download Tank Fitting Kits in pdf
 

DEAN BENNETT SUPPLY CO
1-800-621-4291
Smart Phone Dialable
   

These deluxe long cross tank fittings kits are designed for use with Air-E-Tainer bladder type pressure tanks, or other brand tanks where the discharge tapping is underneath the tank and inside the center of the skirt. Each kit contains a long tank cross, a boiler drain, 100 psi pressure gauge, a pressure switch, 1/4" x 4" brass nipple, and a check valve. We also recommend a 100 psi pressure relief to protect against tank damage from over pressurizing.


Stainless Steel Deluxe Fitting Kit
1" LONG TANK FITTINGS KIT

$   89.35

7091DFK

1" Deluxe long tank fittings kit contains a 1" long tank cross #709, a 100 psi pressure gauge, a 30-50 psi pressure switch, a 1/4" x 4" long brass nipple, a 1/2" boiler drain, and a 1" brass check valve.
 

$ 100.85 709U1DFK

1" Deluxe long tank fittings kit contains a 1" long tank cross with built in union #709U1, a 100 psi pressure gauge, a 30-50 psi pressure switch, a 1/4" x 4" long brass nipple, a 1/2" boiler drain, and a 1" brass check valve.
 

   
$ 149.00 709U1SSDFK

1" Deluxe Stainless Steel long tank fitting kit
with union on tank leg
like the 709U1DFK above except all stainless steel. Kit contains a 1" long stainless tank cross with built in union #709U1SS, 100 psi stainless pressure gauge, 1/4" x 4" long stainless steel nipple, 1/2" stainless bibb spout, and 1" stainless check valve and a 30-50 psi pressure switch, with 1/2" stainless steel pressure relief valve.

   
$     8.50 RV2N100

1/2" pressure relief valve set at 100 psi. 
The 100 psi pressure relief is recommended since most pressure tanks are rated for 100 psi maximum operating pressure.
 

   
$   14.30 RV2N100SS

1/2" Stainless Steel 100 psi Non-adjustable Pressure Relief.
 

   

1-1/4" LONG TANK FITTINGS KIT

   
$ 126.50 709114DFK

1-1/4" Deluxe long tank fitting kit contains a 1-1/4" long tank cross #709, a 100 psi pressure gauge, a 40-60 psi pressure switch, a 1/4" x 4" long brass nipple, a 3/4" boiler drain, and a 1-1/4" brass check valve.
 

   
$ 133.85 709U114DFK

1-1/4" Deluxe long tank fitting kit contains a 1-1/4" long tank cross with built in union #709U114, a 100 psi pressure gauge, a 40-60 psi pressure switch, a 1/4" x 4" long brass nipple, a 3/4" boiler drain, and a 1-1/4" brass check valve.
 

   
$ 187.00 709U114SSDFK

1-1/4" Deluxe Stainless Steel long tank fitting kit with union on tank leg like the 709U114DFK above except all stainless steel. Kit contains a 1-1/4" long stainless tank cross with built in union #709U114SS, 100 psi stainless pressure gauge, 1/4" x 4" long stainless steel nipple, 3/4" stainless bibb spout, and 1-1/4" stainless check valve, and a 40-60 pressure switch with 3/4" stainless steel pressure relief valve.

   
$   12.50 RV3N100

3/4" pressure relief valve set at 100 psi.
The 100 psi pressure relief is recommended since most pressure tanks are rated for 100 psi maximum operating pressure.
 

   
$   15.25 RV3N100SS

3/4" Stainless Steel 100 psi Non-adjustable pressure relief.
 

   

1" SHORT TANK FITTINGS KIT

   
$   78.10 7101DFK 1" Deluxe short tank fittings kit contains a 1" short tank cross #710, a 100 psi pressure gauge, a 30-50 psi pressure switch, a 1/4" x 4" long brass nipple, a 1/2" boiler drain, and a 1" brass check valve.
 
   
$     8.50 RV2N100 1/2" pressure relief valve set at 100 psi.
The 100 psi pressure relief is recommended since most pressure tanks are rated for 100 psi maximum operating pressure.
 
   
1-1/4" SHORT TANK FITTINGS KIT
 
   
$   95.95 710114DFK 1-1/4" Deluxe short tank fittings kit contains a 1-1/4" short tank cross #710, a 100 psi pressure gauge, a 30-50 psi pressure switch, a 1/4" x 4" long brass nipple, a 3/4" boiler drain, and a
1-1/4" brass check valve.
 
   
$   12.50 RV3N100 3/4" pressure relief valve set at 100 psi.
The 100 psi pressure relief is recommended since most pressure tanks are rated for 100 psi maximum operating pressure.
 
   

TANK CROSSES

   
$   14.75 7101 1" #710 short tank cross with all 3 points tapped 1" male and 3/4" female thread. Tank leg of tee is 3 1/4" long, the 2 front ports are 1/2", and the 2 top ports are 1/4"
 
Short tank cross for plumbing a water pressure tank.
#710 SHORT
TANK CROSS
 
$   26.00 7091 1" #709 long tank cross with all 3 points tapped 1" male and 3/4" female thread. Tank leg is 9 1/2" long, the 2 front ports are 1/2", and the 2 top ports are 1/4"
 
Long tank cross for attaching to bottom of pressure tank under center of tank.
#709 LONG TANK CROSS
 
$   37.50 709U1 1" #709U1 long tank cross with built in union. Tank leg has 1" male threads. Cross in front of the union, has 1" male threads and 3/4" female internal threads on ends of the cross. There are two 1/2" female thread openings in the front of the cross for a boiler drain and a pressure relief, and two 1/4" female thread openings in the top of the cross for a 1/4" brass nipple used for mounting the pressure switch, and the second one is for the pressure gauge.
 

#709U LONG TANK CROSS
 
$   54.00 709U1SS 1" Stainless Steel long tank cross with built in union. Tank leg has 1" male threads. Cross in front of the union has 1" male threads and 3/4" female internal threads on the ends of the cross. There are two 1/2" female thread openings in the front of the cross for a bibb spout and a pressure relief, and two 1/4" female thread openings in the top of the cross for a 1/4" stainless nipple used to mount the pressure switch, and a second one is for the pressure gauge.
 

709 Stainless Steel Tank Cross with Union
$   21.95 710114 1-1/4" #710 short tank cross with all 3 points tapped 1 1/4" male and 1" female. Tank leg is 3 1/4" long, the 2 front ports are 3/4", and the 2 top ports are 1/4"
 
   
$   52.50 709114 1-1/4" #709 long tank cross with all 3 points tapped 1 1/4" male and 1" female. Tank leg is 12 1/2" long, the front 2 ports are 3/4", and the 2 top ports are 1/4"
 
   
$   59.75 709U114 1-1/4" #709U114 long tank cross with built in union. Tank leg has 1-1/4" male threads. Cross in front of the union, has 1-1/4" male threads and 1" female internal threads on ends of the cross. There are two 3/4" female thread openings in the front of the cross for a boiler drain and a pressure relief, and two 1/4" female thread openings in the top of the cross for a 1/4" brass nipple used for mounting the pressure switch, and the second one is for the pressure gauge.
 
   
$   77.00 709U114SS 1-1/4" Stainless Steel long tank cross with built in union. Tank leg has 1-1/4" male threads. Cross in front of the union has 1-1/4" male threads and 1" female internal threads on the ends of the cross. There are two 3/4" female thread openings in the front of the cross for a bibb spout and a pressure relief, and two 1/4" female thread openings in the top of the cross for a 1/4" stainless nipple used to mount the pressure switch, and a second one is for the pressure gauge.
 
   

PRESSURE RELIEF VALVES
Download Pressure Reliefs in pdf

   
 

ECONOMY NON-ADJUSTABLE PRESSURE RELIEFS

   
RV2N $     6.95 1/2" non-adjustable pressure relief
set at 75 psi.
   
RV3N $     9.55 3/4" non-adjustable pressure relief
set at 75 psi.
   

RV2N100

$     8.50

1/2" non-adjustable pressure relief
set at 100 psi.
   
RV3N100 $   12.50 3/4" non-adjustable pressure relief
set at 100 psi.
 
   
RV2N100SS $   14.30 1/2" non-adjustable stainless steel pressure relief set at 100 psi.    
RV3N100SS $   15.25 3/4" non-adjustable stainless steel pressure relief set at 100 psi.
 
   
  DELUXE ADJUSTABLE PRESSURE RELIEF VALVES    
RV2 $   29.50 1/2" adjustable pressure relief valve
Factory set at 75 psi - adjustable from 10 to 200 psi.
   
RV3 $   43.35 3/4" adjustable pressure relief valve
Factory set at 75 psi - adjustable from 10 to 200 psi.
   
RV4 $   74.50 1" adjustable pressure relief valve
Factory set at 75 psi - adjustable from 25 to 200 psi.
   
RV5 $ 108.00 1-1/4" non-adjustable pressure relief valve. Factory set at 65 psi.
NOT ADJUSTABLE
   
RV8 $ 245.00 2" adjustable pressure relief valve
Factory set at 75 psi - adjustable from
25 - 200 psi.
   
             

We now stock Stainless Steel Tank Tees, Pressure Relief Valves, Boiler Drains.

HOME                    AIR-E-TAINER TANKS

Water Well Accessories
Download our catalog in pdf format


Prices effective September 5, 2013