Zoeller Sewage Pump Basins are designed to install in a basement floor to collect sewage or effluent water to be pumped away with a sump pump or sewage pump. There are also fiberglass basins that are designed to install in the ground outside. Dean Bennett Supply is a stocking distributor for Zoeller sump pumps and sewage pumps, and has the expertise to help you select the proper pump and accessories for your home or small commercial application.
 

  Zoeller Pump Company has the right pump for you. Whether you are pumping sewage or just effluent sump water, call Dean Bennett Supply at 800-621-4291 to select the right pump for you.

BE SURE TO ASK ABOUT OUR ZOELLER
LOYALTY REWARDS DISCOUNT

 

 
 

ZOELLER
Sewage Pump Basins

DEAN BENNETT SUPPLY
Independent Zoeller Pump Distributor
Toll Free   1-800-621-4291
Smart Phone Dialable
 
 
Zoeller sewage pump basin designed to be installed in the basement floor.
18" X 30" Sewage Basin

24" x 30" Sewage Basin for in the floor to use 1 pump in.
24" x 30" Sewage Basin

4" combo style hub pipe seal for sewage inlet to a sewage basin.
4" Combo Hub

POLYETHYLENE SEWAGE PUMP BASINS

These high density polyethylene sewage pump basins are IAPMO approved and are ideal for either residential or commercial applications. Polyethylene basins offer one-piece seam-free construction. Durable steel covers with anti-corrosion coating are included. Poly tanks are for basement floor installation only, not for outdoor use.
Lids are available with 2" or 3" vent as well as 2" or 3" discharge.
Duplex covers include two pump plates and an inspection plate. Gasket,
necessary sealing hardware and flanges and a 4" cast iron entrance hub are standard.

Center line for the hub is 10-1/2" down from the top of the basin.
These sewage pump basins are water tight and gas tight when properly installed.

Sewage Pump Basin Install Instructions

SIMPLEX  SINGLE PUMP SEWAGE PUMP TANK SELECTION
 

Zoeller cast iron sewage check valve.
Sewage Check Valves


18" x 22" deep sump pump basin with Radon sealed lid
18' x 22" deep sump pump tank
with Radon sealed lid.

 

 

 

 

 

 

 

Zoeller 2 pump duplex system installation basin.
Duplex Sewage Basin

Duplex Pump Control Panel for 2 sewage pump system.
Duplex Control Panel

Open panel for the duplex controller to see inside.
Open Duplex Control Panel

 

outdoor burial fiberglass sewage basin

36" x 60" fiberglass outdoor burial sewage basin.

 

 

Build your own sewage pump packaged system with this rail system for connecting from the sewage pump to the sewage discharge line in your buried sewage basin.

#31-0091 $   96.50 18" x  30"  Simplex Poly Tank
with  2" discharge and  2" vent has cast iron hub
 
#31-0082 $ 104.50 18" x  30"  Simplex Poly Tank
with  3" discharge and  3" vent has cast iron hub
 
#31-0159 $ 133.25 18" x  30" Special Simplex Tank with 2" Discharge and 2" Vent is IAPMO  10' Water Stack Test Rated. CA & FL Approved. This tank has a 4" pipe seal for the inlet.
 
#31-0039 $ 276.50* 24" x  30"  Extra Large Simplex Sewage
Poly Tank with  2" discharge and vent with cast iron hub.
 
#31-0040 $ 304.25* 24" x  30"  Extra Large Simplex Sewage
Poly Tank with  3" discharge and vent with cast iron hub.
 
#31-1102
$ 379.00* 24" x  36"  Extra Depth Deluxe Simplex Sewage
Polyethylene Structural Foam Tank with  Fiberglass Lid with 2" vent and discharge, and having a 4" combo hub pipe seal for inlet.
 
#31-0251 $   78.50 18" x  22"  Poly Basin w/ Radon Sealed Steel Lid
for sump pumps only. Inlet has pipe seal for 4" pipe, no hub.
Lid includes pipe seal for 3" vent, 1-1/2" discharge and cord seal.
 

DUPLEX TWO PUMP SEWAGE PUMP TANK SELECTION
Duplex sewage basins are designed to have 2 pumps installed with an alternator control.
 

#31-0043 $ 575.25* 30" x  36"  Duplex Poly Tank with  2" discharge and  2" vent
with 4" cast iron hub.
 
#31-0044 $ 605.25* 30" x  36"  Duplex Poly Tank with  3" discharge and  2" vent
with 4" cast iron hub.
 
#31-0047 $ 755.25* 36" x  36"  Duplex Poly Tank with  2" discharge and  2" vent
with 4" cast iron hub.
 
#31-0048 $ 785.25* 36" x  36"  Duplex Poly Tank with  3" discharge and  3" vent
with 4" cast iron hub.
 

FIBERGLASS OUTDOOR BURIAL SEWAGE BASINS
 

#31-0866 $ 573.50*

24" x 48" FIBERGLASS SIMPLEX BASIN
Simplex Tank for Outdoor Burial Installation

This 24" x 48" deep fiberglass simplex basin is designed for outdoor installation for a single sewage pump or for a grinder pump. The basin has an anti-floatation ring to prevent the tank from rising due to ground water. A solid 3/8" thick fiberglass lid covers the tank, while you get 5 grommet seals to install your incoming and outgoing pipes, one 1-1/4", one 1-1/2", two 2" and one 4".
 

#31-0946 $ 700.25*

24" x 60" FIBERGLASS SIMPLEX BASIN
Simplex Tank for Outdoor Burial Installation.

This 24" x 60" deep fiberglass simplex basin is designed for outdoor installation for a single sewage pump or for a grinder pump. The basin has an anti-floatation ring to prevent the tank from rising due to ground water. A solid 3/8" thick fiberglass lid covers the tank, while you get 5 grommet seals to install your incoming and outgoing pipes, one 1-1/4", one 1-1/2", two 2", and one 4".
 

#310994 $ 151.00 24" x 12" Extension for use with 24" fiberglass outdoor burial basins. Zoeller does not recommend using more than 1 extension on their fiberglass tanks.
 
#31-1451 $ 1209.75*

36" X 60" FIBERGLASS DUPLEX BASIN
NOW IN DENVER STOCK

This 36" x 60" fiberglass outdoor burial basin is designed for a duplex 2 pump installation. The basins comes complete with a set of 5 adapta-flex seals for installing your lines in and out of the basin. The seals are one 1-1/4", one 1-1/2", two 2", and one 4" sizes.

This basin can be used with 2 sewage grinder pumps, or 2 standard Zoeller sewage pumps for a duplex 2 pump sewage system.
 

#310813 $ 215.00 36" x 12" Extension for use with 36" fiberglass outdoor burial basins. Zoeller does not recommend using more than 1 extension on their fiberglass tanks.
 
RAIL SYSTEMS FOR INSTALLATION IN THE ABOVE OUTDOOR BURIAL BASINS

Rail systems allow you to pull a pump up from the sewage basin without having to climb into the basin to disconnect the pump from the discharge. The slide action of the rail system disconnects the pump from the sewage discharge line and guides it up to the top.
 
#SPDS5 $ 360.00 Build your own burial sump or sewage package. This rail system has connection for an 1-1/4" from the pump to the discharge. Install the sewage pump disconnect rail system into any of the outdoor burial basins above, to accommodate installation of your sewage pump, making it like the packaged system we offer above. The rails are 3/4" pipe size, not furnished with the rail system, for the ability to fit any depth tank.
 
#SPDS6 $ 395.00 This 1-1/2" sewage pump disconnect rail system is just like the 2" unit below. The rail system uses 3/4" pipe size rails, not furnished, and can be sized to fit any outdoor burial sewage tank.
 
#SPDS8 $ 475.00 This 2" sewage pump disconnection rail system is just like the unit above, except that it is for 2" discharge pumps to a 2" discharge line. The rail system still uses the 3/4" pipe size rails, not furnished, and can be sized to fit any burial outdoor sewage tank.
 
The above sewage pump disconnect rail systems can also be used in the indoor sewage basins that install into your basement floor. This makes it easier to remove the pump from the basin, and even easier to align the pump when re-installing it into the basin.

* Due to high truck freight cost on basins and sewage systems larger than 18x30, it is necessary to charge
$ 125.00 surcharge on these systems and basins.

FREIGHT IS PREPAID IF ORDER IS OVER  $  1,000.00

BE SURE TO ASK ABOUT OUR ZOELLER
LOYALTY REWARDS DISCOUNT

Zoeller Home Page        Contact us

Zoeller Effluent Sump Pumps         Zoeller Sewage Pumps        

Zoeller Grinder Type Sewage Pumps           Zoeller Packaged Sewage Systems

Zoeller "BEST BUY" Pumps           Zoeller Control Panels

Zoeller Check Valves           Zoeller Float Switches

DEAN BENNETT SUPPLY Home Page


 

Prices effective October 1, 2013